FUJITSU fi-5950 - Manual (Page 45)

25
2.7 Setting up the Stacker
2
BASIC SCANNER OPERA
T
IONS
3. Move your hands away from the stacker slowly.
⇒ The stacker will be fixed in a position tilting forward.
1. Slide the stacker out towards you.
2. Push down the inner part of the stacker.
⇒ The stacker goes back into its horizontal position.
HINT
• When set to “Bottom edge” position, the stacker does not move up or down
and becomes immovable even during scanning operation.
• In this position, the stacker’s maximum load will be 200 sheets.
• If the pages do not stack well, use the Document Smoother. ( “2.8 Using
the Document smoother” on page 27 )
ATTENTION
When you align the documents from the leading edge (by tilting forward
setting of stacker), the documents must meet the following conditions:
Length ( ) Width ( ) ÷ 1.5 <
Ԙ Ԙ
ԙ ԙ