FUJITSU fi-5950 - Manual (Page 36)

16
2.5 Setting the Hopper Height
The adjustment is done by using the Operator Panel on the scanner.
When you press the button, the hopper is raised one step higher.(Low Middle High)
When pressing the button, the hopper is lowered one step lower.(High Middle Low)
HINT
Immediately after the scanner is turned on, the Hopper is initially set to Low.
Send to Scan
Power Th ickness
Hopper Heigh t
Function
Thick
Thin
Function
Hopper Height
Paper Thickness
Thin
Send to Scan
Thick