FUJITSU fi-5950 - Manual (Page 168)

148
6.3 Troubleshooting
(*1) Refer to “7.2 Document Quality” on page 159 .
(*2) Refer to “7.5 Multifeed Detection Conditions” on page 164 .
(*3) Refer to “3.7 Detecting Multifeeds” on page 82 .
(*4) Refer to “2.6 Loading Documents on the Hopper” on page 17 .
(*5) Refer to “4 DAILY CARE“ on page 103 .
(*6) Refer to “5 REPLACEMENT OF CONSUMABLES” on page 119 .
(*7) Refer to “2.9 Setting the Paper Thickness” on page 29 .
YES
NO
Is the Pad or the Brake roller worn
out?
continued from the previous page
Replace the worn out Pad or
Brake roller. (*6)
NO
YES
Have you set the document thickness
on
on the operator panel?
Set the document thickness
to a thicker value (*7)
If the problem can not be resolved with this flowchart, refer to "6.4
Before Contacting a Service Provider."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.