FUJITSU fi-5950 - Manual (Page 129)

109
4.3 Cleaning the Rollers (using the cleaning sheet)
4
DA
IL
Y
C
A
R
E
10. Place the same cleaning sheet with the adhesive side facing up on the
hopper table, aligning the right side with the side guide, as shown in the
illustration below.
11. Press the [Scan] button 2 times (3 times, if Imprinter option is
installed.)
⇒ The cleaning sheet will be fed and ejected into the stacker.
12. Remove the protective paper from a new cleaning sheet and place it with
the adhesive side facing down on the hopper table, aligning its left side
with the side guide.
13. Press the [Scan] button 2 times (3 times, if Imprinter option is
installed.)
⇒ The cleaning sheet will be fed and ejected into the stacker.
14. Place the same cleaning sheet with its adhesive side facing down on the
hopper table, aligning its right side with the side guide.
15. Press the [Scan] button 2 times (3 times, if Imprinter option is
installed.)
⇒ The cleaning sheet will be fed and ejected into the stacker.
If all the cleaning is done, reset the Cleaning counter by referring “5.2 How to check and reset
the Consumable/Cleaning Counter” on page 121 .
16. Press the power button to turn off the scanner.
Scan
Scan
Scan