FUJITSU fi-5950 - Manual (Page 229)

209
8.17 Soft Pick Setting
8
SCANNER SETTINGS
8.17 Soft Pick Setting
When a number of sheets are picked at a time and multi-feed is detected frequently, enable this setting.
When this setting is enabled, the pick roller does not move up and down at the paper picking to decrease
the number of sheets at picking, and multi-feed may decrease.
This setting may be effective for the document in small size.
1. Start up the Software Operation Panel.
Refer to “8.1 Scanner Settings” on page 173 .
2. Select [Device Setting 2] from left side list in the window, and select [Soft
Pick Setting] from its lower level.
3. Specify whether to enable or disable Soft Pick Setting.
Default is “Disable”.
ATTENTION
When this setting is enabled and the document thickness is smaller than
the specified in
“7.2 Document Quality” on page 159 , paper jam may
occure.