beautypg.com

18 paper jam detection, Section 8.18 – FUJITSU fi-5950 User Manual

Page 230

background image

210

8.18 Paper Jam Detection

8.18 Paper Jam Detection

You can set the degree of detection sensitivity for a jam at the feeder.

Configure the settings for Paper Jam Detection as follows:

1.

Start up the Software Operation Panel.

Refer to

“8.1 Scanner Settings” on page 173

.

2.

Select [Device Setting 2] from left side list in the window, and select
[Paper jam detection] from its lower level.

3.

Set the degree of detection sensitivity for a jam occurred at the feeder.

If you encounter frequent jams, set the setting to “Sensitivity-Low”.

ATTENTION

Setting to “Sensitivity-Low” reduces the detection accuracy for a paper jam.
If you don’t want to get your important document ripped or crumpled, be
sure to set the setting to “Normal” to scan the document.

See also other documents in the category FUJITSU Scanners: