FUJITSU 500 - Manual (Page 18)

7
Motherboard
1
2
3 4 5 6
1 CPU
2 DIMM slots
Memory modules are inserted into these slots.
Increasing the memory capacity increases the amount of data that the system can read at one
access, thereby improving the processing capability of the PC.
When seen from the front of the PC unit, the far one is the DIMM1 slot and the near one is the
DIMM2 slot.
3 Floppy disk drive connector (FDD)
4 Secondary IDE connector (IDE2)
A standard CD-ROM drive is connected.
5 Primary IDE connector (IDE1)
A standard hard disk drive is connected.
6 Internal battery
This battery provides power to retain information on date and time, and settings made in BIOS
Setup. The life is about 5 years under normal use.