Fortinet FORTIOS V3.0 MR7 - Manual (Page 49)

Configuring a FortiGate SSL VPN Monitoring active SSL VPN sessions
FortiOS v3.0 MR7 SSL VPN User Guide
01-30007-0348-20080718
49
4 If logs will be written to system memory, from the Log Level list, select Information.
For more information, see the “Log & Report” chapter of the
FortiGate
Administration Guide .
5 Select Apply.
To filter SSL VPN events
1 Go to Log&Report > Log Config > Event Log.
2 Select Enable, and then select one or more of the following options:
• SSL VPN user authentication event
• SSL VPN administration event
• SSL VPN session event
3 Select Apply.
To view SSL VPN event logs
1 Go to Log&Report > Log Access.
2 If the option is available from the Type list, select the log file from disk or memory.
You can modify the settings in the top row to meet your requirements. Log
messages are displayed beneath the top row.
Monitoring active SSL VPN sessions
You can display a list of all active SSL VPN sessions. The list displays the user
name of the remote user, the IP address of the remote client, and the time that the
connection was made. The list also identifies which services are being provided
(see
Figure 6 ).
To view the list of active sessions, go to VPN > SSL > Monitor.
Figure 6: Monitor list: Web-only mode connections
When a tunnel-mode user is connected, the Description field displays the IP
address that the FortiGate unit assigned to the remote host (see
Figure 7 ).
No. The identifier of the connection.
User The user names of all connected remote users.
Source IP The IP addresses of the host devices connected to the FortiGate unit.
Begin Time The starting time of each connection.
Description Information about which services are being provided.