FUJITSU MCE3130AP - Manual (Page 39)

2 - 8 C156-E142-02EN
Table 2.3 Environmental and power requirements (2 of 2)
Item Specification
Altitude Operating 3,000 m (10,000 ft) or less
Idle 12,000 m (40,000 ft) or less
Air flow Unused (*4)
Air purity General office environment or better
(dust perticles: Class 5 millions or less)
Note:
1. Current limiter value for +5 VDC power: 5 A or less
2. Specifications under transporting condition are under the packaging specified by Fujitsu.
3. A voltage drop may occur depending on the used power supply or power cable.
*1 At random seek or read/write. Excluding pulse waveform under 500 #s or less.
*2 It demonstrates a power of 5.3 W in an installation environment of a temperature of 25°C,
voltage of 5 V.
*3 The efficiency is specified in an environment of a temperature of 25°C and 0° horizontal level
placement.
*4 For details, refer to section 3.1.3 ‘Air Flow’
2.1.4 Error rate
Data blocks to be accessed are evenly distributed on the disk. Errors due to disk defects are not
included.
(1) Bit error rate after ECC processing
The error rate after ECC processing must be 10 -12 or less. An optical disk cartridge whose raw
error rate is 10 -4 or less should be used.
(2) Positioning error rate
The positioning error rate must be 10 -6 or less. (with retry)
Ambient for
purity