FUJITSU 32 - Manual (Page 94)

87
6.4.4. [Device Setting] tab
Information related to the operation and maintenance of the scanner driver can be displayed
and set up. For some scanner models, this tab may not be displayed, or some items cannot
be set up (grayed out). Changing the setup activates the Apply button. The changed setup is
reflected on the device only if the [Apply] button or [OK] button is clicked. The contents of
this tab folder are not displayed if the scanner driver is either currently in use or not
connected to the computer. If they are not displayed, stop the application being used by the
scanner driver or check the connection. Then, select this tab folder again to display the data.
About how to replace consumables
When [Scanner Information] tab is selected, the following dialog appears.
An equivalent count of the pages scan after consumables are replaced and remaining the
imprinter ink are also displayed in the part of the red frame in the figure. To reset the
consumables counter after replacing consumables, click the [Clear] button. Depending on
the device, this operation can be executed using the operation panel of the device. Displayed
consumables names or item numbers also vary depending on the device. For information,
see the operator’s guide of the scanner.