FUJITSU 32 - Manual (Page 87)

80
6.3. Pop-up Menu
♦ [Scan]
Start the application which is selected on [Common] tab of [Option].
♦ [Rescan Scanner]
Rescans the scanner that is currently connected.
A scanner that is not recognized by the OS cannot be found even though it is rescanned.
♦ [Option]
You can set up the following items.
● Settings of the application to be started when the [Start] or
[Scan] button of the scanner is pressed
[Common]
● Diagnosis of the selected scanner [Diagnosis]
● Indication of the functional information of the selected
scanner
[Device info]
● Replacement of the consumables, Setting of the power
management, Adjustment of the offset and magnificent
[Device setting]
♦ [Select Scanner]
When multiple scanners are connected, select a scanner to be monitored.
With this application, only one scanner can be monitored at a time. If multiple scanners are
connected, scanner switching is required to monitor the individual scanners.
Select a scanner to be monitored in the list of scanners to be connected. (The list is given
below.)
Left-clicking the task tray icon displays connected scanner names on the pop-up menu. It is
also possible to select a scanner on this menu.