FUJITSU 32 User Manual

Page 128

121

Product: M3093GX

(device name: fi-4320S, VSP210)

Type: Desktop

Image sensor:

Reduced optical system

Operating method:

Document fixed, scanner unit moving (flat bed),
Automatic Document Feeder (ADF)

Light source:

Xe discharge tube (Green)

Basic resolution:

400 dpi

Output resolution:

Standard: 400, 300, 240, 200 dpi
With image processing option: 50 dpi to 800 dpi (at steps of 1 dpi)

Grayscale levels (internal):

8 bit 256 levels

Grayscale output:

Enabled (8 bits)

Halftone Patterns:

Dither matrix (can be downloaded), Error diffusion

Flat bed scanning speed:

1.6 sec or less (A4, 200 dpi)

ADF scanning speed

27 pages/minute (200 dpi, A4, 55 kg)

ADF paper chute capacity:

Maximum 50 sheets, ream weight: 55kg, A4

Document size

Maximum 216 mm

356 mm Legal size paper

Supported regular paper:

A4, A5/A5 Landscape, A6/A6 Landscape, B5, B6/B6 Landscape,
Letter, Legal, US Executive

Isolation specification:

Specified (one location)

Background compensation:

Enabled

Brightness / Threshold / Contrast : 255 steps

Gamma pattern:

3 internal types (can be downloaded)

Image processing function:

Simplified Dynamic Threshold(SDTC)

Image processing circuit II required,

Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold(DTC), Smoothing,
Filtering, Noise removal

Interface: SCSI-II

Preview:

Enabled (at Flat bed scanning only)

Flip Side Rotation:

Disabled

Rotation: Enabled

Automatic Size and Skew detection: Disabled

Overscan: Disabled

Buffer scan ([Use Memory on Scanner]) function:

Disabled

Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function: Disabled

1. Use of this scanner requires that the image compression option board (CMP-2) be installed in the scanner.

2. This speed is only specified for the scanner itself. The actual reading speed may vary depending on the

system configuration.

3. Not all sizes of paper can be used in all devices. For details, refer to the users' manual for the device.

For other paper sizes, the customer settings can be used.