FUJITSU 32 User Manual
Page 120
113
Product: fi-4120C2
Type: Desktop
Image sensor:
Color CCD (Reduced optical system)
Operating method:
Automatic Document Feed (ADF), Simultaneous double-sided
scanning
1
,
Long page scanning : Max 216mm x
864mm
Light source:
Fluorescent tube (White)
Basic resolution:
600 dpi
Output resolution:
50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal):
10 bit 1024 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Color (24bit) output:
Enabled
ADF scanning speed
2
: B/W
Single sided: 25 pages per minute (200 dpi, A4, 80g/m
2
)
Double sided: 25 pages per minute (200 dpi, A4, 80g/m
2
)
(= 50 screens per minute)
Color
Single sided: 25 pages per minute (150 dpi, A4, 80g/m
2
)
Double sided: 25 pages per minute (150 dpi, A4, 80g/m
2
)
(= 50 screens per minute)
ADF paper chute capacity:
Maximum 50 sheets (A4, 80g/m
2
, High quality paper, normal
temperature and humidity)
Document size:
Minimum 53mm
x
74 mm
Maximum 216mm
x
355.6mm
Supported regular paper
3
:
A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Name card
Scanning area specification: Specified (one location)
White level follower:
Disabled
Brightness / Threshold / Contrast : 255 steps
High light / Shadow :
255 steps (at Color / Grayscale scanning)
Gamma pattern:
Internal types are not available. (Cannot be downloaded)
At custom specification, entering a value enables to set a pattern.
1
Individual setting : Disabled
2
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
3
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.