FUJITSU 32 - Manual (Page 151)

144
Image processing function: Dynamic Threshold (SDTC, DTC),
Edge emphasis, Edge extraction, Automatic separation, Mirror
image(Black&White only), Reverse image, 256 Color, 8 Color
Imprinter (Endorser): With Imprinter option (Pre-Imprinter / Post-Imprinter)
(Reverse side, minimum left margin printing position of 5 mm)
1
Maximum number of characters to be printed: 40 characters
Counter display range: 0 to 99999 (at 5 digits display)
0 to 16777215 (at 8 digits display)
Direction (Printing): Top to Bottom
Pre-Imprinter / Post-Imprinter switching: Enabled
Interface: Ultra Wide SCSI
Preview: Disable
Flip Side Rotation: Enabled
Rotation: Enabled
Automatic Size and Skew detection
2
: End of Page Detection, Automatic Deskew,
Automatic Page Size Detection, Black Background
Overscan: Enabled (when “Black Background” is selected)
Buffer scan ([Use Memory on Scanner]) function: Enabled
Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function: Enabled
Batch Detection 3 : Enabled
Multifeed detection: Enabled (Check thickness / length)
Pre-Pick: Enabled
Check Over-skew: Enabled
Blank page skip: Enabled (when [Ram cache] or [Use Both Memory] is used)
JPEG Transfer (Hardware Compression) : Enabled
Filter: Page Edge Filler, Digital Endorser
Drop out color: Enabled
sRGB output : Disabled
Use Image Processing Software Option: Disabled
Use of FUJITSU Scanner Control Center: Disabled
1 If 0 mm is specified as the endorser print position, printing will begin 5 mm from the edge of the page.
2
The “Automatic Deskew” and “Automatic Page Size Detection” are not supported with color scanning.
3 Batch Detection can not be used with following Caching, “Use Memory on Scanner” or “Use Both Memory”.