beautypg.com

FUJITSU 32 User Manual

Page 101

background image

94

• The value for custom paper is higher than the maximum scan size. Width needs to

equal 279 mm or less and length needs to equal 420 mm or less.

• The value for custom paper is higher than the maximum scan size. Width needs to

equal 11 inch or less and length needs to equal 16.53 inch or less.

• The value for custom paper is higher than the maximum scan size. Width needs to

equal xxx pixel or less and length needs to equal xxx pixel or less.

Cause:

A value exceeding the limit applicable to the scan area of the scanner
was specified.

User response:

To specify a custom paper size, specify the value that is smaller than
the value applicable to the device.

• The value for custom paper is greater than the maximum scan size. Width need to

less equal 259mm.

• The value for custom paper is greater than the maximum scan size. Width need to

less equal 10.24inch.

• The value for custom paper is greater than the maximum scan size. Width need to

less equal 2048pixel.

Cause:

A value exceeding the limit applicable to the scan area of the scanner
was specified.

User response:

To specify a custom paper size, specify the value that is smaller than
259mm (10.24inch, 2048pixcel)

• The resolution must be less or equal to xxx dpi when scanning in Gray Scale.

• The resolution must be less or equal to xxx dpi when scanning in Color.

• Cannot specify Long Page Scan. Width need to less equal 400dpi.

Cause:

There is a limit on the resolution when gray-scale scanning, long page
scanning or color scanning is used.

User response:

Specify a resolution value that is below the indicated xxx dpi.

• Cannot specify Gray Scale with Custom resolution.

• Cannot specify Color with Custom resolution.

Cause:

Custom resolution was designated when Gray Scale or Color was
designated.

User response:

Designate a resolution value other than Custom.

• Cannot specify Gray Scale with duplex document.

Cause:

Duplex scanning is specified with Gray Scale specified.

User response:

At duplex scanning, select Black/white binary or Half tone for the
[Image type].