FUJITSU 32 - Manual (Page 122)

115
Product: M3092DC (fi-4210C)
Type: Desktop
Image sensor: Reduced optical system
Operating method: Document fixed Flat bed (FB), Automatic Document Feed (ADF),
Simultaneous double-sided scanning
Light source: Fluorescent tube (White)
Basic resolution: 600dpi (FB), 300 dpi (ADF)
Output resolution
1
: 50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal): 10 bit 1024 levels
Grayscale output: Enabled (8 bits)
Halftone Patterns: Dither matrix (can be downloaded), Error diffusion
Color (24bit) output: Enabled
ADF scanning speed 2 : B/W
Single sided: 15 pages per minute (200 dpi, A4, 55 kg)
Double sided: 7.5 pages per minute (200 dpi, A4, 55kg)
(=15 screens per minute)
Color
Single sided: 5 pages per minute (150 dpi, A4, 55 kg)
Double sided: 2.5 pages per minute (150 dpi, A4, 55kg)
(=5 screens per minute)
ADF paper chute capacity: Maximum 50 sheets (A4, ream weight: 55 kg, High quality paper,
normal temperature and humidity)
Document size: Minimum 52mm x 74 mm
Maximum 216 mm x 356 mm
Supported regular paper
3
: A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Name card
Scanning area specification: Specified (one location)
White level follower: Disabled
Brightness / Threshold / Contrast : 255 steps
High light / Shadow : 255 steps (at Color / Grayscale scanning)
Gamma pattern: Internal types are not available. (Cannot be downloaded)
At custom specification, entering a value enables to set a pattern.
Image processing function: Simplified Dynamic Threshold (floating slice),
De-Screen, Edge emphasis, Reverse image, 256 Color, 8 Color
1 Change processing is done inside the driver.
2 This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
3
. Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.