FUJITSU 32 User Manual
Page 135
128
Image processing function:
Simplified Dynamic Threshold (SDTC)
Edge emphasis, Edge extraction, De-screen, 256 color, 8 color,
Reverse image
Imprinter (Endorser):
With Imprinter option
(Reverse side, minimum left margin printing position of 5mm)
1
Maximum number of characters to be printed: 40 characters
Counter display range: 0 to 99999 (at 5 digits display)
0 to 16777215 (at 8 digits display)
Direction(Printing): Top to Bottom
Font (orientation) : Vertical / Horizontal
Bold font : Enabled
2
Interface:
Ultra SCSI, USB 2.0
Preview:
Enabled (at ADF scanning)
Flip Side Rotaiton:
Enabled
Rotation: Enabled
Automatic Size and Skew detection: End of Page Detection, Automatic Page Size Detection,
Black Background
Overscan:
Enabled (when “Black Background” is selected)
Batch Detection:
Disabled
Multifeed detection:
Enabled (Check overlapping / length)
Pre-Pick: Enabled
Check Over-skew:
Disabled
Blank page skip:
Enabled (when [Ram cache] is used)
JPEG Transfer (Hardware Compression) : Enabled
Filter:
Page Edge Filler, Digital Endorser
Drop out color:
Enabled
sRGB output :
Enabled
Use Image Processing Software Option : Enabled
Use of FUJITSU Scanner Control Center: Enabled
1
If 0 mm is specified as the printing position, printing will begin 5 mm from the edge of the page.
2
The firmware version of scanner has to be “K00” or latter.