FUJITSU 32 - Manual (Page 32)

25
4.5. Specifying Driver Operation
♦ [Preview]
Scans in a preliminary image based on set values, and displays the image in the preview
window.
Before actual scanning, the preview function can be used to display the entire document for
specifying the desired scan area.
Some models do not support this function. See "Relevant Image Scanner Specification".
♦ [Scan]
Scans the specified scan range based on set values.
The following "progress indicator" is displayed during scanning to show the progress of the
scan operation. To stop scanning, click the [Cancel] button.
The character string indicates the data transfer mode used between the driver and the
application.
Progress indicator
♦ [Close] / [OK]
Closes the dialog box without scanning.
If a setting is changed, the changed setting is saved in the initial value file.
♦ [Reset]
Restores the current setting values to the status immediately after the window is opened.