beautypg.com

FUJITSU 32 User Manual

Page 158

background image

151

Product: M3099GH

Type: Desktop

Image sensor:

Reduced optical system

Operating method:

Automatic Document Feed (ADF), Simultaneous double-sided
scanning

Light source:

Fluorescent tube (Green)

Basic resolution:

200 dpi

Output resolution:

Standard: 400, 300, 240, 200, dpi
with image processing option: 50 dpi to 400 dpi (at steps of 1 dpi)

Grayscale levels (internal):

8 bit 256 levels

Grayscale output:

Disabled

Halftone Patterns:

Dither matrix (can be downloaded), Error diffusion

ADF scanning speed

1

:

Single sided: 80 pages per minute (200 dpi, A4, 55 kg)

Double sided:

60 pages per minute (200 dpi, A4, 55 kg)
(= 120 screens per minute)

Hopper capacity:

Maximum 1,000 sheets, (ream weight: 55 kg, A4 [High quality
paper, Normal temperature and humidity])

Document size:

Maximum 216 mm

x

356 mm

Supported regular paper

2

:

A4/A4 Landscape, A5/A5 Landscape, B5, B6/B6 Landscape,
Letter, Legal, US Executive

Cutout specification:

Specified (one location)

White level follower:

Enabled

Brightness / Threshold / Contrast : 255 steps

Gamma pattern:

3 internal types (can be downloaded)

Image processing function:

Simplified Dynamic Threshold (SDTC)
With image processing option
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold (DTC), Smoothing,
Filtering, Noise removal

Imprinter (Endorser):

With imprinter (endorser) option
(Reverse side, minimum left margin printing position of 20 mm)

3

Maximum number of characters to be printed: 20 characters

Counter display range: 0 to 65535 (5 digits display)

Direction (Printing): Top to Bottom

Interface: SCSI-II

Preview: Disabled

1. This speed is only specified for the scanner itself. The actual reading speed may vary depending on the

system configuration.

2

Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.

For other paper sizes, the customer settings can be used.

3

If 0 mm is specified as the endorser print position, printing will begin 20 mm from the edge of the page.