ATL Telecom AM2 - Manual (Page 93)

ATL User Guide
AM2 G.SHDSL Modem
93
You can configure three time servers in this system. Move the cursor to the update_rate and press the enter
key.
Command: admin sntp update_rate <10~268435455>
Message: Please input the following information.
Update period (secs) (Enter for default) : 86400
Move the cursor to the time_zone and configure where your AM2 is placed. The easiest way to know the
time zone offset hour is from your PC clock. Double click the clock at the right corner of monitor and check
the time zone.
Command: admin sntp time_zone <-12~12>
Message: Please input the following information.
GTM time zone offset (hours) (Enter for default) : -
Move the cursor to list and review the setting.
7.3.2.8 UTILITY
There are three utility tools, upgrade, backup and restore, embedded into the firmware. You can update the
new firmware via TFTP upgrade tools and backup the configuration via TFTP backup tool and restore the
configuration via TFTP restore tool. For upgrades, the TFTP server with the new firmware will be supported by
your supplier but for backup and restore, you must have your own TFTP server to backup and restore the file.
Move the cursor " >> " to the utility command and press the enter key.
>> upgrade Upgrade main software
backup Backup system configuration
Restore Restore system configuration
7