ATL Telecom AM2 - Manual (Page 25)

ATL User Guide
AM2 G.SHDSL Modem
25
6
6.4.5 ROUTER EXAMPLE - LAN TO LAN CONNECTION
In the following example two AM2 units will be configured to connect two LANs.The section will cover the
configuration of both the CO (Central Office) unit and the CPE (Customers Premises Equipment) unit .Before
you configure the AM2 it is advisable to check with your ISP that the gateway, and WAN details you are going
to use are correct.
6.4.5.1 AT THE CO UNIT
The following outlines the steps that need to be followed to setup the unit as a CO Route unit.
6.4.5.1.1 STEP 1
From the options displayed, select the Route and CO Side options. Then click on the Next button