ATL Telecom AM2 - Manual (Page 80)

ATL User Guide
AM2 G.SHDSL Modem 80
Global
To set up the global IP address pool, move the cursor ">>" to the global command and press the enter key.
>> range Edit global IP address pool
interface Bind address pool to specific interface
delete Delete global IP address pool
list Show global IP address pool
Range
You can create five global IP address pool ranges via the range command.
Command: setup ip_share nat global range <1~5> <1~253>
Message: Please input the following information.
NAT global IP address range entry number <1~5>: 1
Base address: 122.22.22.2
Number of address: 3
Interface
After configuration of the global IP address range, You can bind an address pool to a specific interface via the
Interface command.
Command: setup ip_share nat global interface <1~5> <1~8>
Message: Please input the following information.
NAT global ddress range entry number <1~5>: 1
Active interface number <1~8>: 1
Delete
You can delete global IP address ranges from 1 to 5 by using the delete command.
List
You can view the global IP address range via the list command.