ATL Telecom AM2 - Manual (Page 44)

ATL User Guide
AM2 G.SHDSL Modem 44
Count: 40
Global Start IP Address: 69.210.1.9
Count: 2
Press Finish to continue.
The screen will prompt for parameters that will be written in EPROM. Check the parameters before writing in
EPROM. Press Restart to restart the modem working with new parameters or Continue to configure another
parameter.
6.5.6 VIRTUAL SERVER
For example: Specific ports on the WAN interface are re-mapped to services inside the LAN. As only
69.210.1.8 (e.g., assigned to WAN from ISP) is visible to the Internet, but does not actually have any services
(other than NAT of course) running on the gateway, it is said to be a virtual server. Request with TCP made
to 69.210.1.8:80 are remapped to the server 1 on 192.168.0.2:80 for working days from Monday to Friday
8 AM to 6PM, other requests with UDP made to 69.210.1.8:25 are remapped to server 2 on 192.168.0.3:25
and always on.
You can setup the modem as Index 1, protocol TCP, interface WAN1, service name test1, private IP
192.168.0.2, private port 80, public port 80, schedule from Day Monday to Friday and time 8:0 to 16:0 and
index 2, protocol UDP, interface WAN1, service name test2, private IP 192.168.0.3, private port 25, public port
25, schedule always.
Click Virtual Server to configure the parameters.