ATL Telecom AM2 - Manual (Page 18)

ATL User Guide
AM2 G.SHDSL Modem 18
6.2 BASIC SETUP
The Basic Setup contains LAN, WAN, Bridge and Route operation modes. Thus offering all of the features
required to setup the AM2. This is the easiest way to setup the AM2. From the main menu select the Basic
option.
Note: The advanced functions are only for advanced users with experience of setting up modems and routers.
Incorrect setting of any of the advanced functions will affect the performance of the AM2 or will result in
system errors.
6.3 BRIDGE
6.3.1 BRIDGE EXAMPLE - LAN TO LAN CONNECTION
In the following example two AM2 units will be configured to connect two LANs.The section will cover the
configuration of both the CO (Central Office) unit and the CPE (Customers Premises Equipment) unit .Before
you configure the AM2 it is advisable to check with your ISP that the gateway, and WAN details you are going
to use are correct.