ATL Telecom AM2 User Manual
Page 73
ATL User Guide
AM2 G.SHDSL Modem
73
VPI VCI
There is an unique VPI and VCI value for Internet connection supported by ISP. The range is from 0 to 255
and VCI from 0 to 65535..
ENCAP
There are two types of encapsulation, VC-Mux and LLC.
QoS
You can setup the PVC quality of service, VC QoS, using qos command. The product supports UBR, CBR, VBR-
rt and VBR-nrt. The peak cell rate can be configured from 64kbps to 2400kbps. Move the cursor to the qos
command and press the enter key. The following sub-menu will be displayed.
>>
class Configure QoS class
pcr
Configure peak cell rate (kbps)
scr
Configure sustainable cell rate (kbps)
mbs Configure max. burst size (cell)
ISP
The ISP command is used to configure the account name, password and idle time.The Idle time can be set
from 0 to 300 minutes.
IP-Type
Allows the user to select either Dynamic IP or Static IP.
List
You can review the WAN interface configurations using the list command.
7