ATL Telecom AM2 - Manual (Page 17)

ATL User Guide
AM2 G.SHDSL Modem
17
6
After restarting your PC, open the Inernet Explorer or Netscape Browser to connect to the AM2. Type in the
default IP address for the AM2 into the Address/URL Line of the browser and press the Return key., e.g.
http://192.168.0.1
The default IP address and sub net-mask of the AM2 is 192.168.0.1 and 255.255.255.0. Because the AM2
acts as a DHCP server in your network, the AM2 will automatically assign an IP address for your PC in the
network.
Note:- If you have two or more AM2 units connected to the same network then you must change the IP
address of the AM2.
You will now be prompted to type in the default User Name and Password and click on the OK button.
The default User Name is root.
The default password is root.
For security reasons we suggest you change both the user name and password. Ref to section 6.7