ATL Telecom AM2 - Manual (Page 35)

ATL User Guide
AM2 G.SHDSL Modem
35
6
If your modem is setup in bridge mode and you want to setup advanced filter function, you can use BRIDGE
menu to setup the filter function, blocking function.
Click Bridge to setup.
Press Add to add the static bridge information.
If you want to filter the definite MAC address of LAN PC to access the Internet, press Add to establish the
filtering table. Key the MAC address in MAC address field and select Filter in LAN field.
If you want to filter the definite MAC address of WAN PC to access the LAN, press Add to establish the
filtering table. Key the MAC address in MAC address field and select Filter in WAN field. For example: if your
VC is setup at WAN 1, select WAN 1 Filter.
The screen will prompt the parameters that will be written in EPROM. Check the parameters before writing
in EPROM.