ATL Telecom AM30 User Manual
Page 82
82
ATL Telecom User Guide
AM30
a.
Click the Services tab, and then click DNS in the task bar. The
DNS Configuration page displays.
Figure 40. DNS Configuration Page
b.
Type the IP address of the DNS server in an empty row and click
.
You can enter only two addresses.
c.
Click the Enable radio button, and then click
.
3.
Click the Admin tab, and then click Commit & Reboot in
the task bar.
4. Click
to save your changes to permanent
memory.
Note
DNS addresses that are assigned to LAN PCs prior to
enabling DNS relay will remain in effect until the PC is
rebooted. DNS relay will only take effect when a PC's DNS
address is the LAN IP address.
Similarly, if after enabling DNS relay, you specify a DNS
address (other than the LAN IP address) in a DHCP pool or
statically on a PC, then that address will be used instead of
the DNS relay address.