ATL Telecom AM30 - Manual (Page 104)

104 ATL Telecom User Guide
AM30
Adding a PPP Interface Definition
If you intend to use more than one type of service from your ISP, the device can be
configured with multiple PPP interfaces, each with unique logon and other properties.
Follow this procedure to define properties for a PPP interface:
1. From the PPP Configuration Page, click .
The PPP Interface – Add page displays, as shown in
Figure 50.
Figure 50. PPP Interface – Add Page
2. Select a PPP interface name from the drop-down list, and
then enter or select data for each field.
Note
You can create multiple PPP interfaces only if you are using
the PPoA protocol; only one PPP interface can be defined if
you are using PPoE. Check with your ISP which version of
the protocol they require.
The fields are defined in the tables on page 100 and 102.
3. Click .
A page displays to confirm your changes.
4. Click to return to the PPP page and view the new
interface in the table.