ATL Telecom AM30 - Manual (Page 46)

46 ATL Telecom User Guide
AM30
fEnabling DHCP: If you choose to have the LAN port
be a DHCP client of an internal or external server, the
LAN Network Mask field will be dimmed and made
unavailable for entry. The LAN IP Address field will
remain editable, however. The address that you
specify here will be used as a request to the DHCP
server. This is referred to as a "Configured IP
Address" in the program. If the configured IP address
is not available from the DHCP server, then system
will accept another assigned address. Even after
another number is assigned, the same configured IP
address will continue to display in this field.
3. Click .
fIf you changed the LAN IP address while working
from a PC that is connected to the device via
Ethernet, then your connection will be terminated.
fIf you changed the LAN IP address while working
from a PC connected to the device via USB, a page
will display to confirm your change and your
connection will remain active.
fIf you enabled the DHCP service, the ADSL/Ethernet
router will initiate a request for an IP address from
your LAN's DHCP server. If a different IP address is
assigned than was previously configured, your
current connection will be terminated.
4. Reconfigure your PCs, if necessary, so that their IP
addresses place them in the same subnet as the new IP
address of the LAN port. See the Quick Start chapter, “Part 2
— Configuring Your Computers,” for instructions.
5. Log into Configuration Manager by typing the new IP
address in your Web browser’s address/location box.
6. If the new settings work properly, click the Admin tab, and
then click
Commit & Reboot in the task bar.
7. Click to save your changes to permanent
memory.