ATL Telecom AM30 - Manual (Page 25)

ATL Telecom User Guide
AM30
2
5
Connecting a computer to the USB port
If you use the ROUTER’s USB port to connect to a PC, you must install the provided USB driver
software on the PC. The driver enables Ethernet-over-USB communication with the ROUTER .
Configuring the USB computer is a two-part process:
fIn Part 1, you install the USB driver on the PC.
fIn Part 2, you configure the IP properties on the USB
PC.
Part 1. Installing the USB Driver: Ensure that the USB cable is not connected to the USB
port on the PC. The installation program will prompt you when to connect the cable.
12. Copy the USB installation files to a temporary directory on
the USB computer.
13. In the folder where you copied the files, double-click on
setup.exe to start the DSL Modem Setup Wizard.
The Installing window displays as the Wizard prepares
your system for the installation, as shown in Figure 5:
Figure 5. USB Setup Wizard: Installing Window