ATL Telecom AM30 - Manual (Page 31)

ATL Telecom User Guide
AM30
3
1
Default Router Settings
In addition to handling the DSL connection to your ISP, the ADSL/Ethernet router can
provide a variety of services to your network. The device is preconfigured with default
settings for use with a typical home or small office network.
Table 1 lists some of the most important default settings; these and other features are
described fully in the subsequent chapters. If you are familiar with network configuration,
review the settings in Table 1 to verify that they meet the needs of your network. Follow
the instructions to change them if necessary. If you are unfamiliar with these settings, try
using the device without modification, or contact your ISP for assistance.
Before you modifying any settings, review Chapter 0 for general information about
accessing and using the Configuration Manager program. We strongly recommend that
you contact your ISP prior to changing the default configuration.
Table 1. Default Settings Summary
Option Default Setting Explanation/Instructions
DHCP (Dynamic
Host Configuration
Protocol) DHCP server enabled with the
following pool of addresses:
192.168.1.3
through
192.168.1.34 The ROUTER maintains a pool of private IP addresses
for dynamic assignment to your LAN computers. To
use this service, you must have set up your
computers to accept IP information dynamically, as
described in Part 2 of the Quick Start. See Chapter 0
for an explanation of the DHCP service.
NAT (Network
Address Translation) NAPT rule enabled Your computers’ private IP addresses (see DHCP
above) will be translated to your public IP address
whenever they access the Internet. See Chapter 5 for
a description of the NAT service.
LAN Port Assigned static IP address:
192.168.1.1
Subnet mask:
255.255.255.0
This is the IP address of the LAN port on the device.
The LAN port connects the device to your Ethernet
network. Typically, you will not need to change this
address. See Chapter 0 for instructions.
USB Port
IP Address Assigned static IP address:
192.168.1.2
Subnet mask:
255.255.255.0
This is the IP address assigned to the USB port on the
device (if used). Typically, you will not need to
change this address. See Chapter 0 for instructions.