IDEC WindSRV User Manual

Page 97

Text mode
Original mode

www.kepware.com

KEPServerEX5 Help

If the communications driver is either Ethernet-based or supports an unconventional station or node name, the dialog
shown below may be displayed. In this case, the Device ID is a TCP/IP ID. TCP/IP or UDP IDs consist of four values
separated by periods. Each value has a range of 0 to 255. Some Device IDs are string based.

Note: Depending on the communications driver being used, there may be more parameters that need to be defined in
the New Device - ID dialog. For more information on the driver's Device ID, refer to its help documentation.