IDEC WindSRV - Manual (Page 141)

140
www.kepware.com
KEPServerEX5 Help
Source:
Runtime
Possible Cause:
The client application sent a write to an item and it was rejected.
Solution:
1. The tag may have Read/Write access in the server even though the device only allows reads. Verify that the item is
Read Only and change the access Writes in the server. Additionally, change the action in the connected client
application.
2. The server may have timed-out in demo mode. Save and then restart the server.
Update of object '' failedError Type:Warning
Source:Runtime
Possible Cause:An attempt was made to update an object in the project that is neither accessible nor available.
Solution:Save the project to a different location.
Write request rejected on item reference '' since the device it belongs to
is disabledError Type:Warning
Source:Runtime
Possible Cause:An attempt was made to write to a tag that is on a disabled device.
Solution:Devices can be programmatically disabled, thus indicating to the server that it should not be communicated with at this
time. To enable it, write to the _Enabled system tag. Alternatively, check the Enable data collection check box in Device
Properties.
Write request rejected on Read Only item reference ''Error Type:Warning
Source:Runtime
Possible Cause:An attempt was made by the client application to write to a Read Only item.
Solution:1. Change the tag's access to Read/Write (if supported).
2. Change the client application so that it does not attempt to write to the item.
Pages: 1 … 139 140 141 142 143 … 165 wrong Brand wrong Model non readable See also other documents in the category IDEC Equipment: MicroSmart AS-i (58 pages) SX5L Series (68 pages) Basic 4.6 Series" (680 pages) Basic 4.6 Series" (1448 pages) MicroSmart (525 pages) MicroSmart Pentra (162 pages) MicroSmart Pentra (168 pages) FL1E SmartRelay (24 pages) FL1E SmartRelay (356 pages) WindMSG (27 pages) FS1A Controller (154 pages) FS1A Controller (400 pages) SE4D Type 4 Hand (36 pages) SG2 Type 2 Hand & Body (6 pages) SG4 Type 4 Finger & Hand (66 pages) SG4 Type 4 Finger & Hand (4 pages) Sitemap
Error Type:
Warning
Source:
Runtime
Possible Cause:
An attempt was made to update an object in the project that is neither accessible nor available.
Solution:
Save the project to a different location.
Write request rejected on item reference '' since the device it belongs to
is disabled
Error Type:
Warning
Source:
Runtime
Possible Cause:
An attempt was made to write to a tag that is on a disabled device.
Solution:
Devices can be programmatically disabled, thus indicating to the server that it should not be communicated with at this
time. To enable it, write to the _Enabled system tag. Alternatively, check the Enable data collection check box in Device
Properties.
Write request rejected on Read Only item reference ''
Error Type:
Warning
Source:
Runtime
Possible Cause:
An attempt was made by the client application to write to a Read Only item.
Solution:
1. Change the tag's access to Read/Write (if supported).
2. Change the client application so that it does not attempt to write to the item.