IDEC WindSRV - Manual (Page 150)

149
www.kepware.com
KEPServerEX5 Help
Possible Cause:
OPC Diagnostics capturing were stopped by a connected Configuration.
Solution:
N/A.
Unable to add channel due to driver-level failure
Error Type:
Error
Source:
Configuration
Possible Cause:
An attempt was made to add a channel to the server and it failed due to issues in the driver.
Solution:
1. Refer to the additional messages that will be posted with information on the driver-level error.
2. If necessary, contact Technical Support for additional help.
Unable to add device due to driver level failure
Error Type:
Error
Source:
Configuration
Possible Cause:
An attempt was made to create a device in a server project, but it failed due to an issue in the driver.
Solution:
Refer to the additional error messages that follow, in order to learn about the driver error.
Unable to backup project file to ''
Error Type:
Error
Source:
Configuration
Possible Cause:
The server was unable to backup the project to the specified location.
Solution:
Ensure access permissions to the destination folder.
Unable to backup project file to ''
Error Type:
Error
Source:
Configuration