Error control, Forced error control, Hardware flow control – IDEC WindSRV User Manual
Page 153
152
www.kepware.com
KEPServerEX5 Help
Line dropped at remote site on '
No comm handle provided on connect for line '
Remote line is not answering on '
TAPI configuration has changed, reinitializing...
TAPI line initialization failed: '
The phone number is invalid '
Unable to apply Modem Configuration on line '
, Error control
Error Type:
Information
Source:
TAPI Manager
Possible Cause:
Error control has been set in the Modem Configuration dialog.
Solution:
N/A.
, Forced error control
Error Type:
Information
Source:
TAPI Manager
Possible Cause:
Forced Error control has been set in the Modem Configuration dialog
Solution:
N/A.
, Hardware flow control
Error Type:
Information
Source:
TAPI Manager
Possible Cause:
Hardware Flow control has been set in the Modem Configuration dialog.
Solution: