Modem tags – IDEC WindSRV User Manual
Page 32
31
www.kepware.com
KEPServerEX5 Help
The _Statistics branch found under the Channel branch will only appear when diagnostics are enabled for the channel.
In order to reference a Diagnostics Tag from a DDE application given the above example and the DDE defaults, the link
would appear as follows:
=
|_ddedata!Channel1._Statistics._SuccessfulReads
The values of the Diagnostics Tag can also be viewed directly in the server by using the
window.
If "Enable Diagnostics" has been selected under Channel Properties, right-click on that channel and then select
Diagnostics.
See Also:
Note: Modem Tags are described in the topics under Modem Support.
Modem Tags
The following tags are created automatically for the channel when modem use is selected.
Syntax Example:
Supported Modem Tag Names
Tag Name
Description
Access
_Dial
Writing any value to this tag initiates
dialing of the current PhoneNumber.
The Write is ignored unless the
current Status is 3 (Idle). An error is
reported if the is current phone
number has not been initialized.
Read/Write