Tapi configuration has changed, reinitializing, Tapi line initialization failed: ' Page 159
Page 159
158
www.kepware.com
KEPServerEX5 Help
Solution:
1. Hang up and then try again later.
2. Verify that the remote modem is configured to answer calls.
TAPI configuration has changed, reinitializing...
Error Type:
Information
Source:
TAPI Manager
Possible Cause:
The TAPI Line configuration has changed. TAPI is now reinitializing the modem with the changes.
Solution:
None available.
TAPI line initialization failed: '
Error Type:
Warning
Source:
TAPI Manager
Possible Cause:
The telephony service is not required to be running in order for the Runtime to start. When the service is disabled and a
serial driver is added to the project, this error message is reported.
Solution:
1. If modem communications is not going to be used, no action is required.
2. If modem communications is required, the telephony service will need to be started on the PC.
The phone number is invalid '
Error Type:
Information
Source:
TAPI Manager
Possible Cause:
The phone number entered and dialed is incorrectly formatted for the local or long distance settings.
Solution:
Open the Modem Configuration and verify the number formats required. Then, re-dial the number with the correct
format.
Unable to apply Modem Configuration on line '
Error Type:
Warning
Source:
TAPI Manager
Possible Cause: