IAI America RCM-E - Manual (Page 64)

56
8.11.2 Software Reset
Resets the software (re-start up the controller).
* Version V2.00 or later make available the software reset function.
It is ready for models of PCON, ACON, SCON, RCP2, ERC and ERC2.
Slct Mode/M2 A. 00
* User Adjust
In the mode select screen, using the keys,
select User Adjustment, and then press the Return
key.
User Adjust A. 00
Adjust 4
Input 4 into the adjustment number, and press the
Return key.
Soft Reset A. 00
* Reset? Y Æ 1 N Æ 0
When performing the software reset, press the
key.
(When interrupting the software reset, press the
key. The screen returns to the mode select screen.)
Soft Reset A. 00
* Srv OFF? Y Æ 1 N Æ 0
During servo on, if pressing the key, a message
“Srv OFF?” appears on the full screen.
(When interrupting the software reset, press the
key. The screen returns to the mode select screen.)
Soft Reset A. 00
Please Wait. Y Æ 1 N Æ 0
A message “Please wait.” appears, and the software
reset is carried out.
After carrying out, the screen returns to the mode
select screen.