InFocus Laser Platform M-300 - Manual (Page 97)

• Laser tube is faulty • Replace laser tube
Engraving disappears, becomes
“lighter”, or appears “choppy”
when raster engraving within ½
inch of Y-axis ruler • Normal condition. The laser system
needs to accelerate and decelerate
within this area • Move graphic and/or material to the
right, outside of this area
• Slowing the raster speed down reduces
the effect
Ihr ULS Vertragshändler :
MarkIDent GmbH
Winterspürerstr. 19
78333 Stockach
www.markident.de