HP DX2000 - Manual (Page 17)

Service Reference Guide, dx2000 uT 359782-002 2–7
Setup Utilities and Diagnostics Features
Hardware
Monitor
(Continued)
System
Temperature
Detects current system temperature.
CPU FAN Speed Detects CPU fan speed.
Chassis FAN
Speed
Detects current chassis fan speed.
CPU VID Detects current CPU voltage.
Vccp Detects current Vccp voltage.
+1.5V Detects current ATX power +1.5V.
+2.5V Detects current ATX power +2.5V.
+3.3V Detects current ATX power +3.3V.
+5.0V Detects current ATX power +5.0V.
+12.0V Detects current ATX power +12.0V.
HVcc Detects current HVcc voltage.
Password
Option
Change
Supervisor
Password
Allows you to set and change the supervisor password.
Password Status Shows password status
Password Check Allows you to set the password check when the supervisor
password is set up.
• Setup: Password prompt appears when BIOS is executed.
• Always: Password verification is checked every time the
computer boots (default).
Load Default
Settings
None Loads the optimal default values for all the setup options.
Save Settings
and Exit
None Saves changes and exits setup.
Exit Without
Savings
None Allows you to exit setup without saving any changes.
✎ Support for Computer Setup options may vary depending on your specific hardware configuration.
Heading Option Description