HP DX2000 - Manual (Page 15)

Service Reference Guide, dx2000 uT 359782-002 2–5
Setup Utilities and Diagnostics Features
✎ Support for Computer Setup options may vary depending on your specific hardware configuration.
Advanced
CMOS Setup
(Continued)
Internal Graphic
Mode Select
Selects the size of memory for internal graphics adapter.
• 1MB: Share 1MB
• 4MB: Share 4MB
• 8MB: Share 8MB (default)
• 16MB: Share 16MB
• 32MB: Share 32MB
Power
Management
Setup ACPI Standby
State
Sets the ACPI standby state when system goes into ACPI
standby mode.
• S1/PSOS: power on suspend
• S3/STR: Suspend to RAM (default)
Restore on AC/
Power Loss
Sets the system status after AC power loss.
• Power Off: System always powers off (Default)
• Power On: System always powers on
• Last State: System returns to the last state before AC power
loss
Resume on Ring Sets the Resume On Ring from soft off.
• Disable: Ring Resume disable (default)
• Enable: Ring Resume enable
Resume on PME Sets the Resume On PME from soft on.
• Disable: PME Resume disable
• Enable: PME Resume enable (default)
Peripheral
Setup
OnBoard LAN Enables or disables the OnBoard LAN.
• Disable: OnBoard LAN disabled
• Enable: OnBoard LAN enabled (default)
OnBoard LAN
Chip Boot ROM
Enables or disables the OnBoard LAN Chip Boot ROM.
• Disable: OnBoard LAN Chip Boot ROM disabled
• Enable: OnBoard LAN Chip Boot ROM enabled (default)
Init. Graphics
Adapter Priority
Sets the initial priority of the graphics adapter.
• VGA/PCI
• PCI/Int-VGA (default)
USB Function Enables or disables the USB controller.
• Disable: USB controller disabled
• Enable: USB controller enabled (default)
✎ Support for Computer Setup options may vary depending on your specific hardware configuration.
Heading Option Description