HP DX2000 - Manual (Page 14)

2–4 359782-002 Service Reference Guide, dx2000 uT
Setup Utilities and Diagnostics Features
2.2.2 Computer Setup Menu
.
Heading Option Description
System
Information
None Lists product name, processor type and speed, cache size (L1/
L2), installed memory size, Chipset type, BIOS version, BIOS
release date, and CPU ID.
Standard
CMOS Setup
System time (hh/
mm/ss)
Sets the system time (24 hour format).
System date (mm/
dd/yy)
Sets the system date.
Floppy drive A Calculates the size and capacity of the floppy drive.
Primary IDE
Master
Auto detects which hard drive is the primary master drive.
Primary IDE Slave Auto detects which hard drive is the primary slave drive
Secondary IDE
Master
Auto detects which hard drive is the secondary master drive.
Secondary IDE
Slave
Auto detects which hard drive is the secondary slave drive.
Advanced
CMOS Setup
Add-On ROM
Display Mode
• Force BIOS: Add-On ROM displayed (default)
• Keep Current: Add-On ROM not displayed
POST Delay Time
(seconds)
Sets the amount of time before the Setup Utility prompt
(F10=Setup) appears when the computer boots.
• None: POST delay time disable (default)
• 5: POST delay of 5 seconds
• 15: POST delay of 15 seconds
• 25: POST delay of 25 seconds
• 35: POST delay of 35 seconds
System Keyboard Detects if a keyboard is present when the computer boots
Absent: keyboard not detected (default)
Present: keyboard detected
APIC ACPI SCI
IRQ
Enables or disables the internal I/O APIC and Multiprocessor
Tables. (Disabling the APIC ACPI SCI IRQ may require you to
reinstall the operating system.)
• Enable: IRQ 20-23 (default)
• Disable: IRQ 09-11
Hyper-Threading
Technology
Enables or disables the Intel Hyper-Threading Technology. (This
item is only selectable with the Intel HTT CPU plug-in.)
• Enable: Intel HTT function enable (BIOS auto detect).
• Disable: Intel HTT function disable (BIOS auto detect).
Boot Device
Priority
Specifies the boot order for all devices.