beautypg.com

HP DC7800 User Manual

Page 133

background image

4.

Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on
the latch and rotating the latch to the open position.

5.

Before installing an expansion card, remove the expansion slot cover or the existing expansion
card.

NOTE:

Before removing an installed expansion card, disconnect any cables that may be attached

to the expansion card.

a.

If you are installing an expansion card in a vacant socket, remove the appropriate expansion
slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside
of the chassis.

Expansion Cards 121

See also other documents in the category HP Computers: