HP 20-Feb User Manual
Page 24
22 Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack
Chapter 1
3. Align the lower (black/silver) rail with the lower two clip nuts, and loosely
install a screw into each clip nut. (See
a. Slide the rail so that it equals the rack depth, and loosely install the
screws.
b. Tighten all screws to secure the rails.
c. Tighten the two pre-installed screws inside each mounting rail to
secure the rail in position.
Figure 6
Upper and Lower Rails
60
40
20