Replacing the power supply, Replacing the power supply 168 – HP 20-Feb User Manual
Page 170
168 Removing and Replacing the Power Supply
Chapter 5
Figure 54
Removing the Stop Bracket for 2/20 Series Library
Replacing the Power Supply
1. Grasp the power supply handle with one hand while supporting the
bottom with your other hand. Align the power supply with the guide notch
at the top of the power supply bay.
2. Fully insert the power supply into the library.
3. Replace the stop bracket (if applicable).
4. Tighten the two thumbscrews with a flat-blade screwdriver.
5. Connect the power cord to the power supply.