beautypg.com

Figure 5, Front back – HP 20-Feb User Manual

Page 23

background image

Chapter 1

Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack 21

Cha
pter 1

Figure 5

Clip Nut Placement (6/60 Series)

2. Align the upper (black) rail with the top two clip nuts and loosely install a

screw into each clip nut. Slide the rail out so that it equals the rack depth,

and attach to the back clip nuts. To allow for enough clearance, do not

tighten these screws until you have installed the library.

Note

Ensure that you are using the appropriate holes in the upper rail

to allow enough clearance, illustrated in

Figure 6

on page 22.

The clearance between the top and bottom rails should be

approximately: 2/20 series = 22 cm (9 in); 4/40 series = 43 cm

(17 in); 6/60 series = 65 cm (26 in).

a

#

#

#

#

#

#

##

##

##

##

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

##

##

##

##

b

Front

Back