HP 20-Feb - Manual (Page 16)

14 Choosing a Location Chapter 1
Choosing a Location
Choose a location that meets the criteria listed in Table 2 . For additional
specifications, refer to Technical Specifications on page 181.
Table 2 Location Criteria
Room temperature 10-35º C (50-95º F)
Power source
■
AC power voltage: 100-127 V or 200-240 V
■
Line frequency: 50-60 Hz
■
A dedicated circuit is required.
Caution: The AC power cord is the library’s main AC disconnect device and
must be easily accessible at all times.
LAN connection Locate the library near a LAN connection for connecting the RMC (remote
management card).
Library power
consumption
2/20 series
4/40 series
6/60 series
8/80 series
10/100 series Max: 200W
Max: 375W
Max: 560W
Max: 725W
Max: 1,200W
Air quality Minimal sources of particulate contamination. Avoid areas near frequently used
doors and walkways, stacks of supplies that collect dust, and smoke-filled rooms.
Caution: Excessive dust and debris can damage tapes and tape drives.
Humidity 20-80% RH