HP 20-Feb User Manual
Page 146

144 Troubleshooting Common Problems
Chapter 4
A new data cartridge is used
and the clean drive icon is
displayed.
■
Ensure you are using an approved cleaning cartridge for your
drive type. (See
■
Clean the outside of the data cartridge using a damp cloth.
■
Clean the drive using the drive cleaning procedure.
■
If the icon is displayed again within a short amount of time,
replace the data cartridge.
Recurring cleaning message.
■
Ensure you are using an approved cleaning cartridge for your
drive type. (
■
Replace the existing cleaning cartridge with a new one.
■
If the message reappears when a particular data cartridge is
used, verify that the data cartridge is readable by:
— Clearing the error message.
— Reading the tape again.
■
If the data cartridge can be read, backup data from the
damaged cartridge to another cartridge, and discard the
damaged one.
Cannot load the cleaning
cartridge.
■
Ensure you are using an approved cleaning cartridge for your
drive type. (See
■
Check the drive media log using the RMC Web-Based Library
Administrator.
■
Contact your service representative.
Cleaning lights
Cause: Contamination by
loose debris.
■
Avoid by ensuring the drive is operated in a clean,
contamination-free environment. Cartridges should be stored
vertically in their plastic cases.
Table 27
Troubleshooting Table
Problem
Solution