HP 20-Feb - Manual (Page 151)

Chapter 4 Troubleshooting Common Problems 149
Chapter 4
The library is not efficiently
backing up data.
■
Check the network bandwidth from the host computer.
■
Check that the library’s drive(s) are on their own SCSI bus and
not daisy-chained to another tape drive or the hard drive.
■
Check that the server and file system have the processing
power and memory needed to stream the tape drive.
■
Ensure that the drive is clean. (See Cleaning a Drive on
page 87.)
■
Try a new tape. A marginal tape can cause performance
problems due to bad spots on the tape requiring retries.
■
Ensure that the backup software is using fixed-length records
(or blocks) to maximize throughput and has not defaulted to a
smaller record size. (64K should be sufficient.)
■
Ensure that the data is being compressed, however do not turn
on both software and hardware compression.
■
Check the size of the files. Backing up several small files can
impact performance.
Operations
Cannot remember the
administration menu
password.
■
Contact your service representative.
Need to abort internal test
cycle.
■
Press [STOP] . The current test loop completes, then the test stops.
It may take a few minutes to stop the current test loop.
Table 27 Troubleshooting Table
Problem Solution